The Destination E for Electric Bikes is our new hitch bike rack designed specifically to carry electric bikes with any sized tire up to 4.5" wide. This new ebike rack with ramp included has a sleek and modern design and can carry up to two 70 lb. electric bikes or standard bikes. It includes an expandable, wide aluminum ramp so you can load and unload your bikes easily. The Destination E hitch-mounted bike rack can fold flat against the car when not in use and features "balanced tilting" where the pivot point is between the bikes for easy trunk access when the bikes are loaded.
Other features include adjustable, keyed-alike locking frame and seat post clamps, ideal for unusual bike geometries as well as our No Wobble-No Tools Hitch Tightening System.
- Dimensions & weight
- Dimensions Diagram
- Capacity: Two Bikes (Max. 70 lbs. per bike, 140lbs capacity total)
- Hitch Size: 2” only (Do not use a 1 ¼” - 2” hitch adapter)
- Includes a 46" long ramp
- Maximum ebike wheelbase: 50”
- Maximum tire width: 4.5”
- Includes keyed-alike locking hitch pin and locking frame clamps
- “No-Wobble Hitch System" eliminates slack between the receiver and the rack without the use of tools
- Folds flat against car when not in use
- Feature's "Balanced Tilting" with the pivot point between the 2 bikes, making tilting down for cargo door access as easy as it gets
- The frame grabbers on this rack can hold step through bikes by the seatpost, bike adapters are not needed and should not be used
- Includes optional fixed Frame Grabber to use in place of quick release option
- Space between bikes: 11"
- Rack Weight: 46 lbs.
- Limited Lifetime Warranty
- Fits round or oval tubing or seat posts between 1" and 2" in diameter
- For step through bikes: Secure the bicycle by using the racks Frame Grabber around the bikes seat post
- 4" Strap Extension Kits sold separately: STPEXT
- Not to be used on front hitches
- Not to be used with a bike cover
- Not to be used with any 1-1/4" - 2" Adapter
- Not to be used with any Hitch Extension longer than 8"
- Not to be used on any trailer, fifth wheel or towed vehicle
-
CLASS B RV APPROVED ONLY (NOT APPROVED FOR CLASS A OR CLASS C RV'S)
-
For Class B RV use, the following requirements must be met:
- The receiver is attached directly to the chassis, not the bumper
- The rear-most point of the receiver hitch where the Destination E will be attached is no more than 64 inches from the rear axle of the vehicle
- The vehicle is a Class B type motorhome and has a gross vehicle weight of 10,000 lbs or less.
-
For Class B RV use, the following requirements must be met:
Destination E Bike Rack for Electric Bikes
Add your Accessories before you proceed to checkout.
Description
Installation
Specifications
Upgrades
Replacement Parts
Product FAQs
E-bike Rack Engineered for Electric Bikes. Built to make Make Riding Easier.
Designed for Electric Bikes. Built for Real Life.
Carries Up to 70 lbs Per Bike — Including Heavy E-Bikes
The Destination E is designed specifically for electric bikes, with a max weight of 70 lbs per bike and a 140 lb total capacity. It also accommodates tires up to 4.5" wide and wheelbases up to 50", making it compatible with most e-bikes on the market today.
Expandable Aluminum Loading Ramp — Included
Unlike most hitch racks, the Destination E comes with a 46" expandable wide aluminum ramp right in the box — no extra purchase needed. Rolling your e-bike up onto the rack takes the strain out of loading and unloading heavy bikes, especially for solo riders.
Balanced Tilting for Easy Trunk Access
The Destination E features a "balanced tilting" system in which the pivot point sits between the two bikes, making it significantly easier to tilt the rack down for cargo door access without removing your bikes first. It's a thoughtful design detail that makes a real difference on everyday trips.
Keyed-Alike Locking Frame Clamps & Hitch Pin
The adjustable frame and seat post clamps lock your bikes in place and come keyed alike with the locking hitch pin — so one key covers both the bikes and the rack. The clamps fit round or oval tubing and seat posts between 1" and 2" in diameter, and also work for step-through bikes without a separate adapter.
No-Wobble Hitch System — No Tools Required
The built-in No-Wobble Hitch System eliminates slack between the rack and your vehicle's 2" receiver without requiring any tools. The result is a rock-solid, rattle-free connection from the moment you install it — getting you on the road faster with one less thing to worry about.
EXPANDABLE, WIDE RAMP FOR EASY LOADING & UNLOADING
Loading & unloading your E-bike rack has never been easier — easy on your back and easy on your bike!
NO-WOBBLE HITCH SYSTEM
Eliminates slack between the receiver hitch and rack without the use of tools. Quick and easy rack installation gets you on the road faster with a more secure fit.
TILTS DOWN FOR EASY TRUNK ACCESS
No need to unload your bikes to get your helmet, backpack, or to let the puppy out. The Destination E rack features “balanced tilting” with the pivot point between the bikes making tilt down as easy as it gets.
EVERYONE NEEDS A RAMP.
If you have an electric bike you've been there. Yes, you may think a ramp is not for you but once you experience the ease of loading and unloading your e-bikes with just a gentle, smooth move, there is no way back. You didn't think you needed a ramp, until now.
FAQ
Does the Destination E Bike have a ramp option?
Yes, the Destination E includes a ramp for easy loading and unloading.
How much does the Destination E weigh?
Fully assembled the rack weighs 46lbs.
What is the maximum bike weight capacity?
The Destination E has a weight limit of 70lbs, per bicycle.
Can I access the back of my car while the rack is installed?
Yes, Destination E angles a full 90 degrees away from your car. Allowing you to access the hatch of your car with ease!
Are replacement parts available for the Destination E?
Yes, Replacement parts are available on the Destination E product page, by clicking “Replacement Parts” and searching the replacement parts diagram for the parts you need to replace.
Will the Destination E work with a 1.25” receiver ?
The Destination E requires a 2” receiver hitch.
Should I remove the battery before transport?
Yes, actually most e-bike manufacturers recommend removing the battery.
Can I carry fat tire e-bikes?
The Destination E is compatible with tires up to 4 inches.
Can I carry step-through bikes?
Yes, With step through bikes we suggest securing the bike by seat tube and not the frame.
Is the Destination E compatible with RVs?
The Destination E is approved for Class B RVs only, under the following requirements:
- The receiver is attached directly to the chassis, not the bumper
- The rear-most point of the receiver hitch where the Destination E will be attached is no more than 64 inches from the rear axle of the vehicle
- The vehicle is a Class B type motorhome and has a gross vehicle weight of 10,000 lbs or less.
Does the Destination E Bike have a ramp option?
Yes, the Destination E includes a ramp for easy loading and unloading.
How much does the Destination E weigh?
Fully assembled the rack weighs 46lbs.
What is the maximum bike weight capacity?
The Destination E has a weight limit of 70lbs, per bicycle.
Can I access the back of my car while the rack is installed?
Yes, Destination E angles a full 90 degrees away from your car. Allowing you to access the hatch of your car with ease!
Are replacement parts available for the Destination E?
Yes, Replacement parts are available on the Destination E product page, by clicking “Replacement Parts” and searching the replacement parts diagram for the parts you need to replace.
Will the Destination E work with a 1.25” receiver ?
The Destination E requires a 2” receiver hitch.
Should I remove the battery before transport?
Yes, actually most e-bike manufacturers recommend removing the battery.
Can I carry fat tire e-bikes?
The Destination E is compatible with tires up to 4 inches.
Can I carry step-through bikes?
Yes, With step through bikes we suggest securing the bike by seat tube and not the frame.
Is the Destination E compatible with RVs?
The Destination E is approved for Class B RVs only, under the following requirements:
- The receiver is attached directly to the chassis, not the bumper
- The rear-most point of the receiver hitch where the Destination E will be attached is no more than 64 inches from the rear axle of the vehicle
- The vehicle is a Class B type motorhome and has a gross vehicle weight of 10,000 lbs or less.
The Destination E for Electric Bikes is our new hitch bike rack designed specifically to carry electric bikes with any sized tire up to 4.5" wide. This new ebike rack with ramp included has a sleek and modern design and can carry up to two 70 lb. electric bikes or standard bikes. It includes an expandable, wide aluminum ramp so you can load and unload your bikes easily. The Destination E hitch-mounted bike rack can fold flat against the car when not in use and features "balanced tilting" where the pivot point is between the bikes for easy trunk access when the bikes are loaded.
Other features include adjustable, keyed-alike locking frame and seat post clamps, ideal for unusual bike geometries as well as our No Wobble-No Tools Hitch Tightening System.
- Capacity: Two Bikes (Max. 70 lbs. per bike, 140lbs capacity total)
- Hitch Size: 2” only (Do not use a 1 ¼” - 2” hitch adapter)
- Includes a 46" long ramp
- Maximum ebike wheelbase: 50”
- Maximum tire width: 4.5”
- Includes keyed-alike locking hitch pin and locking frame clamps
- “No-Wobble Hitch System" eliminates slack between the receiver and the rack without the use of tools
- Folds flat against car when not in use
- Feature's "Balanced Tilting" with the pivot point between the 2 bikes, making tilting down for cargo door access as easy as it gets
- The frame grabbers on this rack can hold step through bikes by the seatpost, bike adapters are not needed and should not be used
- Includes optional fixed Frame Grabber to use in place of quick release option
- Space between bikes: 11"
- Rack Weight: 46 lbs.
- Limited Lifetime Warranty
- Fits round or oval tubing or seat posts between 1" and 2" in diameter
- For step through bikes: Secure the bicycle by using the racks Frame Grabber around the bikes seat post
- 4" Strap Extension Kits sold separately: STPEXT
- Not to be used on front hitches
- Not to be used with a bike cover
- Not to be used with any 1-1/4" - 2" Adapter
- Not to be used with any Hitch Extension longer than 8"
- Not to be used on any trailer, fifth wheel or towed vehicle
-
CLASS B RV APPROVED ONLY (NOT APPROVED FOR CLASS A OR CLASS C RV'S)
-
For Class B RV use, the following requirements must be met:
- The receiver is attached directly to the chassis, not the bumper
- The rear-most point of the receiver hitch where the Destination E will be attached is no more than 64 inches from the rear axle of the vehicle
- The vehicle is a Class B type motorhome and has a gross vehicle weight of 10,000 lbs or less.
-
For Class B RV use, the following requirements must be met:

















